A-pillar 3 pod meter holder

Definition: A-pillar 3 pod meter holder ( ABS ) for 52mm gauges. ( picture is for illustration use only and might differ from actual product )

Car: Subaru - Impreza GC8 96/01 GT

Article number: SBMH-960103

Big brake kit rear

Definition: Fully cast and CNC machined to ensure the highest quality; Rotora`s high performance brake system enables superior brake modulation while improving overall pedal feel to ensure equal distribution of weight transfer when braking. To achieve this proportional front-to-rear brake bias, Rotora?s 2-piece cast aluminum calipers are fine tuned by increasing the clamp load to the optimal level while utilizing the stock master cylinder to retain overall front-to-rear brake bias. Rotora?s rear big brake system is comprised of a set of 1-piece 11.6? slotted oversize vented ?e-coated? disc, a set of high performance 2-piston calipers (red or blue of your choice), Rotora ceramic friction material race pads, and stainless-steel braided brake lines (D.O.T. compliant). All Rotora brake systems are direct bolt on replacement with minimal modifications required.


Car: Subaru - Impreza GC8 96/01 GT

Article number: RBK16.01MC ( blue )

Big brake kit rear

Definition: Fully cast and CNC machined to ensure the highest quality; Rotora`s high performance brake system enables superior brake modulation while improving overall pedal feel to ensure equal distribution of weight transfer when braking. To achieve this proportional front-to-rear brake bias, Rotora?s 2-piece cast aluminum calipers are fine tuned by increasing the clamp load to the optimal level while utilizing the stock master cylinder to retain overall front-to-rear brake bias. Rotora?s rear big brake system is comprised of a set of 1-piece 11.6 slotted oversize vented ?e-coated? disc, a set of high performance 2-piston calipers (red or blue of your choice), Rotora ceramic friction material race pads, and stainless-steel braided brake lines (D.O.T. compliant). All Rotora brake systems are direct bolt on replacement with minimal modifications required.


Car: Subaru - Impreza GC8 96/01 GT


Article number: RBK16.01A ( red )

Carbon " TRC" style hood Definition: AeroworkS Carbon Fiber Hoods/trunks are made from the finest carbon fiber available. Each hood is protected with a UV coating, that will allow the hood to hold its high gloss finish. All our carbon fiber hoods are Grade A and above. Our Carbon Fiber Hoods have a tight carbon weave, rolled edges, and one piece undersiding.

Car: Subaru - Impreza GC8 96/01 GT

Article number: 95SBIMP4DTRC-010

Carbon "ST"-style hood scoop Definition: AeroworkS Carbon Fiber products are made from the finest carbon fiber available. Each part is protected with a UV coating, that will allow the hood to hold its high gloss finish. All our carbon fiber products are Grade A and above.

Car: Subaru - Impreza GC8 96/01 GT

Article number: 95SBIMP4DST-080

Carbon center dash gauge holder

Definition: Center dash gauge holder, for 52 or 60mm gauges.

Car: Subaru - Impreza GC8 96/01 GT

Article number: SBMH-97010C

Carbon OEM style Hood

Definition: Carbon OEM style Hood, AeroworkS Carbon Fiber Hoods/trunks are made from the finest carbon fiber available. Each hood is protected with a UV coating, that will allow the hood to hold its high gloss finish. All our carbon fiber hoods are Grade A and above. Our Carbon Fiber Hoods have a tight carbon weave, rolled edges, and one piece undersiding.


Car: Subaru - Impreza GC8 96/01 GT


Article number: 95SBIMP4DOE010

Carbon trunk

Definition: Carbon trunk. AeroworkS Carbon Fiber Hoods/trunks are made from the finest carbon fiber available. Each hood is protected with a UV coating, that will allow the hood to hold its high gloss finish. All our carbon fiber hoods are Grade A and above. Our Carbon Fiber Hoods have a tight carbon weave, rolled edges, and one piece undersiding.


Car: Subaru - Impreza GC8 96/01 GT


Article number: 95SBIMP4DOE020

Corner lights "Euro-clear"

Definition: fr. bumper lights "Euro-clear" , comes as a set of 2. Is "E" approved.

Car: Subaru - Impreza GC8 96/01 GT

Article number: 220-1511SET

Eye brows

Definition: Eye brows ( 2pcs/set )

Car: Subaru - Impreza GC8 96/01 GT

Article number: 221CA4137

Eye brows

Definition: Eye brows ( 2pcs/set )

Car: Subaru - Impreza GC8 96/01 GT

Article number: 2210CA4137(4160)

Front (up) strut tower bar ( alu )

Definition: Vivid strut tower bars, ( non adjustable bar ) improve the handling of your verhicle during hard braking/cornering, making steering quicker and more responsive.

Car: Subaru - Impreza GC8 96/01 GT

Article number: SBST-96010A

Front bumper "LD"

Definition: Fr. bumper, fits on OEM/factory mounting positions. Comes with mesh-grille where applicable.

Car: Subaru - Impreza GC8 96/01 GT

Article number: SASUBIMPFSCH

Full Alu Racing radiator

Definition: *100% Brazed Aluminum Core (No Epoxy Joints)

*High Efficiency Air Fins

*Polished Aluminum Tanks

*Brackets, Hoses and Fittings All Meet OE Fit-Up

Car: Subaru - Impreza GC8 96/01 GT

Article number: RSB08402FA

Headlamp "1pc" Angel eye black "E"

Definition: Headlamp "1pc" Angel eye black, is not "E" approved. ( 2pcs/set )

Car: Subaru - Impreza GC8 96/01 GT

Article number: 220-1105IDM

Headlamp "1pc" Angel eye chrome "E"

Definition: Headlamp "1pc" Angel eye chrome, is not "E" approved. ( 2pcs/set )

Car: Subaru - Impreza GC8 96/01 GT

Article number: 220-1105SET

Headlamp Euro-clear black

Definition: Headlamp Euro-clear black, is not "E" approved. ( 2pcs/set ) no cornerlights included!!

Car: Subaru - Impreza GC8 96/01 GT

Article number: 220-1105ZWL/R

Meterholder dashboard

Definition: Meterholder dashboard, for use with 52mm cauges/meters, mounts on center of dashboard.

Car: Subaru - Impreza GC8 96/01 GT

Article number: SBMH-97010

Rear bumper "LD" style

Definition: Rear bumper, fits on OEM/factory mounting positions. Comes with mesh-grille where applicable.

Car: Subaru - Impreza GC8 96/01 GT

Article number: SASUBIMPHSCH

Rear up strut bar alu

Definition: Improves car handling performance in addition to that it has a very nice appearance under the hood/trunk.

Car: Subaru - Impreza GC8 96/01 GT

Article number: SBST-96R10A

Short shifter (polished) Definition: Designed for serious enthusiasts. Our Short Shift kits are CNC machined to aircraft industry tolerances from billet 6061-T6 aluminum for superior strength. The FS Series of shifters reduce throw by 40-55%.

Car: Subaru - Impreza GC8 96/01 GT

Article number: SBSS-96010C

Side mirror "ZERO" style

Definition: Side mirror "ZERO" , ABS material, fits on OEM mounting points (manual)

Car: Subaru - Impreza GC8 96/01 GT

Article number: JC97-1675SET

Sidemarker lamp "Euro-clear"

Definition: Sidemarker lamp "Euro-clear". ( 2pcs/set )

Car: Subaru - Impreza GC8 96/01 GT

Article number: 220-1403SET

Sidemarker lamp crystal

Definition: Sidemarker lamp crystal, is "E" approved ( 2pcs/set )

Car: Subaru - Impreza GC8 96/01 GT

Article number: 220-1403SET

Sideskirts "LD" style

Definition: Sideskirts, fits on OEM/factory mounting positions. Comes with mesh-grille where applicable.

Car: Subaru - Impreza GC8 96/01 GT

Article number: SASUBIMPSWLR

Rear slotted rotor ( set )

Definition: Rotora high performance replacement rear slotted rotors
( 2pcs/set )

Car: Subaru - Impreza GC8 96/98 GT

Article number: 1684701101/2S

Front bumper lip "Sti" style

Definition: Front bumper lip "Sti" style ( ABS ), fits on OEM/Factory front bumper ( 99/01 models only )

Car: Subaru - Impreza GC8 99/01 GT

Article number: SBFL-98010A

Subaru - Impreza GT GC8 96/01

Cat-back exhaust GT350

Definition: full stainless high performance 3" mandrel bend free flow cat-backsystem, designed for maximum power and torque. GT-350 style.

Article number: SBCB-960103

Subaru - Impreza GT GC8 96/01

Cat-back exhaust G200-Ti

Definition: Invidia G200-Ti 3" (76mm ) Exhaust manufactured from SUS-304 fully polished stainless steel from the cat-back to the canister with an advance prolonged titanium tip to maximize exhaust airflow, The burned titanium tip symbolize the G200 Exhaust aggressive appear in today's elegance. All Invidia exhaust system engineered with advanced technology, Invidia uses computerized mandrel-bent process to enhance airflow the best straightest possible route from the cat-back to the tip outlet with the least amount of bends. G200 Exhaust is invented for noise reduction without scarificing performance

Article number: SBCB-9601032

Subaru - Impreza GT GC8 96/01

Down/Frontpipe

Definition: Downpipe/Frontpipe with "Bell-mouth", 3" stainless steel mandrel bend. Is designed for maximum flow* (* note: without catalyser , off road use only)

Article number: SBDP-960103

Subaru - Impreza GT GC8 96/01

Cross header ( Equal length )

Definition: true equal length header, performance in its purest form. polished and robot-tigwelded, outlet ports are also polished. Real craftmanship ( below mentioned dyno was preformed after installation of Invidia header and full cat-back system )

Article number: MSB-9600120

Subaru - Impreza GT GC8 96/01

Down/Frontpipe + race cat.

Definition: Downpipe/Frontpipe with "Bell-mouth", 3" stainless steel mandrel bend. Is designed for maximum flow, including high flow metal CAT. for street use.. emission legal

Article number: SBDP-960103C

Subaru - Impreza WRX GD-A 01/-

Cat-back exhaust GT350

Definition: full stainless high performance 3" mandrel bend free flow cat-backsystem, designed for maximum power and torque. GT-350 style.

Article number: SBCB-0101W1

Subaru - Impreza WRX GD-A 01/-

Cat-back exhaust G200-Ti

Definition: Invidia G200-Ti 3" (76mm ) Exhaust manufactured from SUS-304 fully polished stainless steel from the cat-back to the canister with an advance prolonged titanium tip to maximize exhaust airflow, The burned titanium tip symbolize the G200 Exhaust aggressive appear in today's elegance. All Invidia exhaust system engineered with advanced technology, Invidia uses computerized mandrel-bent process to enhance airflow the best straightest possible route from the cat-back to the tip outlet with the least amount of bends. G200 Exhaust is invented for noise reduction without scarificing performance

Article number: SBCB-0101W2

Subaru - Impreza WRX GD-A 01/-

Down/Frontpipe

Definition: Downpipe/Frontpipe with "Bell-mouth", 3" stainless steel mandrel bend. Is designed for maximum flow* (* note: without catalyser , off road use only)

Article number: SBDP-0101W1

Subaru - Impreza WRX GD-A 01/-

Cross header ( Equal length )

Definition: true equal length header, performance in its purest form. polished and robot-tigwelded, outlet ports are also polished. Real craftmanship ( below mentioned dyno was preformed after installation of Invidia header and full cat-back system )

Article number: MSB-010120

Subaru - Impreza WRX GD-A 01/-

Down/Frontpipe + race cat.

Definition: Downpipe/Frontpipe with "Bell-mouth", 3" stainless steel mandrel bend. Is designed for maximum flow, including high flow metal CAT. for street use.. emission legal

Article number: SBDP-01013C

Downpipe/Frontpipe ( wastegate splitter )

Definition: Downpipe/Frontpipe with "Bell-mouth" incl. wastegate splitter, 3" stainless steel mandrel bend. Is designed for maximum flow* (* note: without catalyser off road use only )

Article number: SBDP-01013S

Subaru - Impreza WRX GD-A 01/-

Uppipe ( manifold )

Definition: Uppipe ( manifold )

Article number: SBUP-0101W

Subaru - Impreza 96/01 GC8 GT

Front Cross-Member Brace lower

Definition: Front Cross-Member Brace lower ( actual colour may vary )

Article number: SBFC-960103

Subaru - Impreza 96/01 GC8 GT

Front (up) strut bar alu. polished

Definition: Front (up) strut bar alu. polished

Article number: SBST-960103

Air Intake polished ( Cold air )

Definition: AEM pioneered the Cold Air induction system for sport compact cars in 1995. Our Cold Air systems are dyno-proven to create more useable power than any other system of their kind. AEM proudly manufactures and assembles its air induction systems in the USA. ( web. picture might differ from actual product )

Car: Subaru - Impreza WRX GD-A/B 01/-

Article number: 21-474P

Big brake kit front (355mm)

Definition: 6-PISTON FRONT CALIPER,2-PIECE SYSTEM FRONT . 355X32MM OVERSIZE CROSS-DRILLED AND SLOTTED DISC, ROTORA HIGH-CERAMIC RACE PADS, STAINLESS STEEL BRAKE LINES, AND CARBON STEEL (SC45) MOUNT BRACKET

Car: Subaru - Impreza WRX GD-A/B 01/-

Article number: RBK02101AC

Big brake kit rear (355mm )

Definition: 4-PISTON REAR CALIPER, 2-PIECE SYSTEM REAR 330X32MM OVERSIZE CROSS-DRILLED AND SLOTTED DISC, ROTORA HIGH-CERAMIC RACE PADS, STAINLESS STEEL BRAKE LINES, AND CARBON STEEL (SC45) MOUNT BRACKET

Car: Subaru - Impreza WRX GD-A/B 01/-

Article number: RBK02101MC ( blue )

Bonnet vent

Definition: Bonnet vent, fits on OEM mounting positions. Comes with mesh-grille where applicable.

Car: Subaru - Impreza WRX GD-A/B 01/-

Article number: 221PA264GA

Carbon "ST"-style hood scoop

Definition: Empty

Car: Subaru - Impreza WRX GD-A/B 01/-

Article number: 01SBWRX4DST-080

Carbon "TRC" style Hood

Definition: Carbon "TRC" style Hood.AeroworkS Carbon Fiber Hoods/trunks are made from the finest carbon fiber available. Each hood is protected with a UV coating, that will allow the hood to hold its high gloss finish. All our carbon fiber hoods are Grade A and above. Our Carbon Fiber Hoods have a tight carbon weave, rolled edges, and one piece undersiding.

Car: Subaru - Impreza WRX GD-A/B 01/-

Article number: 02SBIMP4DTRC-010

Carbon center dash gauge holder

Definition: Center dash gauge holder, for 52 or 60mm gauges.

Car: Subaru - Impreza WRX GD-A/B 01/-

Article number: SBMH-01010C

Carbon dashboard cluster cover

Definition: Carbon roof diffusor "VERT-X" , AeroworkS Carbon Fiber products are made from the finest carbon fiber available. Each product is protected with a UV coating, that will allow the hood to hold its high gloss finish. All our carbon fiber products are Grade A and above.

Car: Subaru - Impreza WRX GD-A/B 01/-

Article number: SBDC-0101WC

fits on Factory/OEM mounting positions. All parts like mirrors, interiorcoverpanel, etc can be replaced no need to modify. ( 4pcs/set )
Car: Subaru - Impreza WRX GD-A/B 01/-
Article number: 02SBIMP4DOE-040

Carbon mirror cover

Definition: Carbon mirror cover set, full dry carbon fibre clear coated . perfect fitment
( 2pcs/set )

Car: Subaru - Impreza WRX GD-A/B 01/-

Article number: SBGD-0101MC

Carbon OEM style Hood

Definition: Carbon OEM style Hood. AeroworkS Carbon Fiber Hoods/trunks are made from the finest carbon fiber available. Each hood is protected with a UV coating, that will allow the hood to hold its high gloss finish. All our carbon fiber hoods are Grade A and above. Our Carbon Fiber Hoods have a tight carbon weave, rolled edges, and one piece undersiding.

Car: Subaru - Impreza WRX GD-A/B 01/-

Article number: 02SBIMP4DOE-010

Carbon TRCII style Hood

Definition: AeroworkS Carbon Fiber Hoods/trunks are made from the finest carbon fiber available. Each hood is protected with a UV coating, that will allow the hood to hold its high gloss finish. All our carbon fiber hoods are Grade A and above. Our Carbon Fiber Hoods have a tight carbon weave, rolled edges, and one piece undersiding.

Car: Subaru - Impreza WRX GD-A/B 01/-

Article number: 02SBIMP4DTRCII-010

Cat-back system

Definition: Cat-back system, 3" (76mm). Like our header systems, DC Sports exhaust systems are dyno tested to outperform all comparable systems on the market. Extensive research and development goes into each exhaust system design to ensure the best performance and sound for your vehicle.

Our exhaust systems are CNC Mandrel bent, hand welded, feature a straight-through muffler core, utilize the factory mounting locations and include complete hardware for ease of installation. DC Sports exhaust systems are manufactured from 304-stainless steel piping and feature a polished tip emblazoned with the DC Sports logo.

Car: Subaru - Impreza WRX GD-A/B 01/-


Article number: SCS6301

Cupdifussor

Definition: Cupdifussor, fits on OEM mounting positions. Comes with mesh-grille where applicable.

Car: Subaru - Impreza WRX GD-A/B 01/-

Article number: 221RS77146

Definition: Downpipe/frontpipe, deletes first cat. 3" ( 76mm ). race use only.

Car: Subaru - Impreza WRX GD-A/B 01/-

Article number: SDP4301B

Exhaust manifold/Header (4-1)

Definition: Exhaust manifold/Header, improves exhaust gas flow resulting in increased engine performance and torque. ( also suitable to GC8/GT models )

Car: Subaru - Impreza WRX GD-A/B 01/-

Article number: SBMH-0101H

Fr. bumper "TRC" style

Definition: Fr. bumper "TRC" , fits on factory mounting positions. ( FRP ). Comes with alu mesh grille where applicable.

Car: Subaru - Impreza WRX GD-A/B 01/-

Article number: 02SBIMP4DTRC-050-1

Front . bumperlip

Definition: Fr. bumperlip, fits also STI, fits on OEM mounting positions. Comes with mesh-grille where applicable.

Car: Subaru - Impreza WRX GD-A/B 01/-

Article number: 221FS3370

front. Grille "CWS" style

Definition: fr. Grille "CWS" style

Car: Subaru - Impreza WRX GD-A/B 01/-

Article number: 02SBIMP4DTRC-050-5

Fr. strut tower bar -Ti

Definition: Race-inspired design is the lightest, strongest strut bar available! Virtually eliminates body flex for improved handling and drivability.Manufactured from ultra-light 6AI-4V aerospace titanium with titanium mounting pads ( Fits STi version as well )

Car: Subaru - Impreza WRX GD-A/B 01/-

Article number: STT-4301

Front bumper lip "CWS"

Definition: Fr. bumper lip "CWS" style(FRP), fits on standard OEM/Factory front bumper.

Car: Subaru - Impreza WRX GD-A/B 01/-

Article number: 02SBIMP4DCW-050-1

Full Alu Racing radiator

Definition: *100% Brazed Aluminum Core (No Epoxy Joints)

*High Efficiency Air Fins

*Polished Aluminum Tanks

*Brackets, Hoses and Fittings All Meet OE Fit-Up

Car: Subaru - Impreza WRX GD-A/B 01/-

Article number: RSB08302FA

Rear (up) strut bar alu. ( non adjustable )

Definition: Rear (up) strut bar alu.Vivid strut tower bars are designed to improve handling of your verhicle during braking or hard cornering, making steering quicker and more responsive.

Car: Subaru - Impreza WRX GD-A/B 01/-

Article number: SBST-01R10A